After-Sales Service And Application Service - Bosch EasyVac 12 Originalbetriebsanleitung

Cleaning the dust container (see figures C1–C2)
Clean the dust container (6) after each use in order to en-
sure that the vacuum cleaner continues to perform optim-
ally.
– Hold the vacuum cleaner down slightly so that dust can-
not fall out of the dust container when the vacuum cleaner
is opened.
– Press the release button (1) and remove the dust con-
tainer (6) from the motor housing (5).
– Shake out the dust container (6) over a suitable waste
bin.
– Clean the filters if required.
– Then fit the dust container into the bottom of the motor
housing and apply light pressure to the dust container un-
til you hear it click into place.
Cleaning the filter (see figures D1 – D4)
The filter (16) must not be wet cleaned.
– Hold the vacuum cleaner down slightly so that dust can-
not fall out of the dust container when the vacuum cleaner
is opened.
– Press the release button (1) and remove the dust con-
tainer (6) from the motor housing (5).
– Remove the coarse dirt filter (15) from the filter (16).
– Reach into the recess (17) on the motor housing (5) and
pull the filter unit (16) off the motor housing by the filter
seal (18).
– Tap the filter (16) carefully over a suitable waste bin.
Brush the flaps of the filter with a soft brush.
To assemble, perform the same steps in reverse order.
Storage
– Insert the vacuum cleaner accessories into the holder (8)
provided on the vacuum cleaner.
– Optionally, use the wall bracket (19) for space-saving
storage of the vacuum cleaner and its accessories
(see figure E).
Faults
If the suction power is insufficient, check:
– Is the dust container (6) full?
▷ (see "Cleaning the dust container (see figures C1–
C2)", page 13)
– Are the filters (15)/(16) clogged with dust?
▷ (see "Cleaning the filter (see figures D1 – D4)",
page 13)
– Is the battery's state of charge (4) too low?
▷ (see "Battery Charging", page 12)
Regularly emptying the dust container and cleaning the fil-
ters will ensure optimum suction power.
If suction power is still not sufficient, take the vacuum
cleaner to the after-sales service.

After-Sales Service and Application Service

Our after-sales service can answer questions concerning
product maintenance and repair, as well as spare parts. You
can find exploded drawings and information on spare parts
Bosch Power Tools
at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the type plate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
English | 13
1 609 92A 516 | (26.02.2019)