After-Sales Service And Application Service; Transport - Bosch PAS 18 LI Originalbetriebsanleitung

12 | English
Cleaning the Filter Assembly (see figures D1 –D3)
– Press release button 1 and remove the dust cup 5 from the
motor housing 4.
Remove the filter assembly 12 from the dust cup.
– Remove the filter cover 13 from the filter seal 14.
Remove the filter 15 from the filter cover 13.
– Brush down the flaps of the filter with a soft brush.
– Assembly is carried out in reverse order.
Storage
– Put the vacuum cleaner accessories in the provided holder
8 on the vacuum cleaner.
Malfunctions
In the case of insufficient vacuuming performance, check the
following:
– Is the dust cup 5 full?
▷ See "Cleaning the Dust Cup", page 11.
– Is the filter 15 clogged with dust?
▷ See "Cleaning the Filter Assembly", page 12.
– Is the capacity of the battery pack too low?
▷ See "Battery Charging", page 11.
Regular emptying of the dust cup 5 and cleaning of the filter
assembly 12 ensures optimal vacuum capacity.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.

After-sales Service and Application Service

In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the vacuum cleaner.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
1 609 92A 0J0 | (19.3.14)
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com

Transport

The contained lithium-ion batteries are subject to the Danger-
ous Goods Legislation requirements. The user can transport
the batteries by road without further requirements.
When being transported by third parties (e.g.: air transport or
forwarding agency), special requirements on packaging and
labelling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch batteries only when the housing is undamaged.
Tape or mask off open contacts and pack up the battery in
such a manner that it cannot move around in the packaging.
Please also observe possibly more detailed national regula-
tions.
Bosch Power Tools