Starting Operation; Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GAS Professional 14,4 V-LI Originalbetriebsanleitung

OBJ_BUCH-2315-002.book Page 13 Friday, October 28, 2016 12:24 PM
The combination possibilities of the various vacuum cleaner ac-
cessories can be viewed in the figure.
– Connect the vacuum cleaner accessories firmly to the con-
nection at the dust cup 8 and in to each other.
Operation
 Remove the battery before cleaning or performing main-
tenance on the vacuum cleaner, making tool adjust-
ments, changing accessories or storing the vacuum
cleaner. This safety measure prevents the vacuum cleaner
from being started accidentally.

Starting Operation

 Before vacuuming, ensure that the filter assembly is as-
sembled securely.
 Only use an undamaged filter (no cracks, small holes,
etc.). Replace a damaged filter immediately.
Switching On and Off
To save energy, only switch the vacuum cleaner on when using it.
– To switch on the vacuum cleaner, press the On/Off button 4.
The LED 2 lights up when the vacuum cleaner is switched on
and enables the illumination of the work area in poor visibili-
ty.
– To switch off the vacuum cleaner, press the On/Off button 4
again.
Adjusting the vacuuming power
After switching on, the "High" vacuuming power stage is set by
default.
– Press button 3 for low vacuuming power.
– To switch back to high vacuuming power, press button 3
again.

Maintenance and Service

Maintenance and Cleaning

 Remove the battery before cleaning or performing main-
tenance on the vacuum cleaner, making tool adjust-
ments, changing accessories or storing the vacuum
cleaner. This safety measure prevents the vacuum cleaner
from being started accidentally.
 For safe and proper working, always keep the vacuum
cleaner, the filter assembly and the ventilation slots
clean.
– Clean the vacuum cleaner housing from time to time using a
moist cloth.
– Clean soiled charger contacts using a dry cloth.
Cleaning the Dust Cup (see figures C1–C3)
To maintain the optimum performance of the vacuum cleaner,
clean the dust cup 8 after each use.
– Press release button 1 and remove the dust cup 8 from the
motor housing 7.
Bosch Power Tools
Remove the filter assembly 15 from the dust cup.
– Shake/tap out the dust cup 8 over a suitable waste bin.
– If required, clean the dust cup with a moist cloth.
If required, clean the filter assembly (see "Cleaning the Filter
Assembly", page 13).
– Reinsert the filter assembly 15 into the dust cup 8.
Afterwards, hang the dust cup at the bottom into the motor
housing, apply light pressure until the dust cup can be heard
to engage.
Cleaning the Filter Assembly (see figures D1–D3)
– Press release button 1 and remove the dust cup 8 from the
motor housing 7.
Remove the filter assembly 15 from the dust cup.
– Remove the filter cover 16 from the filter seal 17.
Remove the HEPA filter 18 from filter cover 16.
– Brush off the lamellas of the HEPA filter with a soft hand
brush.
– Assembly is carried out in reverse order.
Malfunctions
In the case of insufficient vacuuming performance, check the fol-
lowing:
– Is the dust cup 8 full?
▷ See "Cleaning the Dust Cup", page 13.
– Is the HEPA filter 18 clogged with dust?
▷ See "Cleaning the Filter Assembly", page 13.
– Is the capacity of the battery pack too low?
▷ See "Battery Charging", page 12.
Regular emptying of the dust cup 8 and cleaning of the filter as-
sembly 15 ensures optimal vacuum capacity.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
Exploded views and information on spare parts can also be
found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always in-
clude the 10-digit article number given on the nameplate of the
product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
1 609 92A 2F4 | (28.10.16)
English | 13