After-Sales Service And Application Service - Bosch GAS 12V Professional Originalbetriebsanleitung

cleaner. This safety measure prevents the vacuum cleaner
from being started accidentally.
 For safe and proper working, always keep the vacuum
cleaner and ventilation slots clean.
– Clean the vacuum cleaner housing from time to time using
a moist cloth.
– Clean soiled charger contacts using a dry cloth.
Cleaning the Dust Cup (see figures C1–C3)
To maintain the optimum performance of the vacuum cleaner,
clean the dust cup 8 after each use.
– Hold the vacuum cleaner down slightly so that dust cannot
fall out of the dust chamber when the vacuum cleaner is
opened.
– Press release button 1 and remove the dust cup 8 from the
motor housing 7.
– Reach into the opening 13 on the motor housing 7 and pull
the filter assembly 15 off the motor housing by the filter
seal 14.
– Shake/tap out the dust cup 8 over a suitable waste bin.
– If required, clean the dust cup with a moist cloth.
If required, clean the filter assembly (see "Cleaning the Fil-
ter Assembly", page 11).
– Insert the filter assembly 15 with the filter seal 14 back in-
to the motor housing 7.
Afterwards, hang the dust cup at the bottom into the motor
housing, apply light pressure until the dust cup can be
heard to engage.
Cleaning the Filter Assembly (see figure D)
The filter assembly 15 must not be wet cleaned.
– Hold the vacuum cleaner down slightly so that dust cannot
fall out of the dust chamber when the vacuum cleaner is
opened.
– Press release button 1 and remove the dust cup 8 from the
motor housing 7.
– Reach into the opening 13 on the motor housing 7 and pull
the filter assembly 15 off the motor housing by the filter
seal 14.
– Brush down the flaps of the pleated filter with a soft
broom.
– Assembly is carried out in reverse order.
Malfunctions
In the case of insufficient vacuuming performance, check the
following:
– Is the dust cup 8 full?
▷ See "Cleaning the Dust Cup", page 11.
– Is the folded filter clogged with dust?
▷ See "Cleaning the Filter Assembly", page 11.
– Is the capacity of the battery pack too low?
▷ See "Battery Charging", page 10.
Regular emptying of the dust cup 8 and cleaning of the filter
assembly 15 ensures optimal vacuum capacity.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.
Bosch Power Tools

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
English | 11
1 609 92A 2NK | (12.7.16)