Peiying PY0104 Bedienungsanleitung Seite 13

case of an accident – make sure to install every piece
properly to ensure safety.
Safe driving
Keep in mind that responsibility for safety while operating a
vehicle is solely on the driver of the vehicle. The sensors are
intended as a supplement tool and CANNOT be considered as a
device dismissing the driver from cautious reversing / parking.
The device monitors area behind the vehicle and assists the
driver in keeping safe distance from obstacles, but does NOT
allow for not exercising special caution while driving! The
producer of this device does not claim liability for any misuse
of the product nor damages resulting from failure to observe
these precautions or safety instructions.
Instructions and safety measures
1. The driver should bring the vehicle to a stop once the
constant sound signal is being heard. The parking sensors
do not support braking system and will NOT automatically
stop the vehicle once a certain distance from obstacle has
been reached.
2. Pay special care when reversing - slow down to minimum
to avoid hitting the obstacle.
3. Clean the sensors regularly. Remove ice, snow, dirt, dust,
mud etc. to ensure proper operation. Any dirt on the
sensor decrease its sensitivity by about 20%. In case of
a sensor being covered in ice, the system will not work
properly!
4. Avoid flattening, cutting, damaging the insulation,
extending the cables connecting the sensors to the
control unit - it may negatively affect their operation.
EN
Owner's manual
13