Troubleshooting - Cookmax Mvb330 Handbuch

TROUBLESHOOTING

In the event of a fault, unplug it from the wall outlet and contact the Service Department of your local dealer.
Do not disassemble the internal parts of the machine.
The manufacturer declines all responsibility for any tampering!
Problem
The machine does not start
The machine stops during
operation
At the end of the cycle, the bag
is not sealed or bad sealed
The machine does not reach an
optimum vacuum
RECYCLING
The markings illustrated here (barred garbage bin), on the utensil data plate, indicates that at the
end of its working life, the utensil must be disposed of and recycled according to European
Directive. The Directive provides for the separate collection of electric and electronic equipment
by a collection system called RAEE. Upon purchasing a new utensil, the user must not dispose
of the utensil as urban waste but must return it, in a one-to-one exchange, to the dealer or
distributor. The dealer may dispose of the utensil following the procedures set by the RAEE collection
system. In the event the user disposes of the utensil without purchasing a new one, in Italy contact the
manufacturer who will provide suitable information on machine disposal at the collection centre closest to the
user. Users who do not reside in Italy must contact the Ministry of the Environment in their countries who will
provide information necessary for correct disposal. Failure to observe the disposal procedure may cause
harmful effects on the environment and people. Therefore, total or partial illicit utensil disposal by users is
punishable by local authorities.
Cause
Main wall switch off
Lack of voltage on the power line
Lateral switch I/O switch off
Plug not inserted
Lack of voltage on the power line
Microswitch movable part not
pressed
Resistance sealing bar interrupted
Incorrect setting sealing time
Incorrect setting type of cycle
Silicon bar dirty, badly positioned
or damaged
Decompression chamber gasket
damaged
Incorrect setting vacuum time
15
Remedy
Switch ON the main wall switch
Contact your electricity supplier
Switch ON the lateral switch
Insert the plug into the socket
Contact your electricity supplier
Contact your Service Dealer
Contact your Service Dealer
Set the correct value
Set the correct type
Clean it, reposition it or contact
your Service Dealer
Contact your Service Dealer
Set the correct value