From the home page, press the
menu (see figure);
again pressing the
program in use.
Vacuum time: using the
time in seconds (1 to 99). The value is saved automatically.
Pressing the right side button, you will pass the second parameter, the sealing
time.
Sealing time: using the
in second (0.1 to 4.0). The value is saved automatically.
Pressing the
Pressing a second time returns you to the home page.
Settings of the machine
From the home page, press the
menu; pressing the right side button to select the settings of the machine (see
figure);
again pressing the
of the machione.
Time and date: press
Using the
indicated by the cursor; with left or right buttons to move the cursor. The value
is saved automatically.
To exit the setting time and date, press the center button
Pressing the right side button, you switch to the contrast parameter.
Using the
value is saved automatically.
Pressing the right side button, you switch to the language parameter.
Using the
language from those available (ENG, FRA, ITA, ESP, DEU). The value is
saved automatically.
Pressing the
Pressing a second time returns you to the home page.
button, you can set the parameters of the
and
and
button at any time of the programming to return to the main menu.
button, you can set the parameters of setting
to access.
and
buttons to change the parameter
and
buttons to set the contrast. The
and
buttons to choose the desired
key at any time of the programming to return to the main menu.
button, you enter the main
buttons to set the
buttons to set the time
button, you enter the main
.
12