Recommendations For Use; Maintenance And Cleaning; General Safety Instructions - Cookmax Mvb330 Handbuch

- visually verify that the sealing is done correctly;
- place the product to be preserved inside of the bag;
- Proceed with the traditional vacuum cycle previously described.
VACUUM IN THE CONTAINERS
With this option, you can create a vacuum in the containers without activating the welding.
- Put the plug into the power socket;
- press the lateral switch I/O (fig.2): the switch lights up and the machine is switched on;
- press the fuction button
- with the side buttons to select the desired program; if necessary, change the program settings, as
described in chapter PARAMETERS OF THE PROGRAM;
- lift the movable part;
- place the end without seal of the special vacuum tube containers (optional) to the small opening to
the right in the decompression chamber;
- place the end with seal of the special vacuum tube containers on the lid of the container (optional);
- press the function button
- vacuum completed, the machine stops and you can disconnect the container.

Recommendations for use

- It is suggested to make some tests in that the material of the bag, the temperature, the humidity and
the size of the product, may affect the optimal performance of the vacuum cycle.
- Pay attention to the packaging of sharp or irregular shape (bones, spines, cheese rind, etc.): they
may create microcracks on the bag difficult to detect.
- We recommend the use of bag proportionate to the product to be packaged to avoid unduly
prolonging the time of duration of the working cycle.
- To ensure a good level of vacuum inside the bag, for models with outer bar is recommended that
you only use bag embossed.
Warning
- The outer bar models are not suitable to vacuum packaging of liquid products.
- Some foods even if put vacuum can ferment thus creating the swelling of the envelope after a short
time (for example: beans, potatoes, fresh mushrooms).
- Repeated cycles of welding at elevated temperatures may seriously affect the functionality of the
machine and you should never use serial.

MAINTENANCE AND CLEANING

- At the end of the day remove the plug from the wall socket.
- Before cleaning remove the plug from the wall socket.
- Carefully clean using alcohol or neutral products; clean the outside of the machine with a damp
sponge. Do not use metallic flakes or abrasive cleansers. Thoroughly clean the sealing bar and the
silicone bar located in the movable part from debris plastic.
Having to leave stops the machine for long periods of time, unplug it from the wall outlet, make a general
cleaning of the machine and cover with a cloth in order to protect it from dust.
To perform periodic maintenance only to Service of your Dealer.

GENERAL SAFETY INSTRUCTIONS

- If the cable is damaged it must be replaced at once by qualified personnel.
- Do not touch the appliance with wet hands.
- Protect the appliance from harsh weather conditions (rain or strong sunlight).
- Disconnect the appliance after each time it is used or when it is cleaned.
- Keep it out of the reach of children.
to select the type of work cycle (vacuum in the containers);
to activete the cycle of aspiration;
14