Service Data - ARTHUR MARTIN AKM5615PAX Benutzerinformation

Problem
You want to activate the
True Fan Cooking function,
but the indicator of the Plus
Steam button is on.
You want to activate the
cleaning function, but the
display shows "C4".
The water in the cavity em‐
bossment does not boil.
The water comes out of the
cavity embossment.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
Possible cause
The True Fan Cooking
PLUS function operates.
The Plus Steam button is
pressed in.
The temperature is too low.
There is too much water in
the cavity embossment.
The demo mode is activa‐
ted.
on the front frame of the appliance cavity.
Do not remove the rating plate from the
appliance cavity.
Remedy
Push the Plus Steam button
to stop the True Fan
Cooking PLUS function.
Press the Plus Steam button
again.
Set the temperature at least
to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the water
with a cloth or sponge. Add
the correct amount of water
to the cavity embossment.
Refer to the specific proce‐
dure.
1. Deactivate the oven.
2. Press and hold the but‐
ton .
3. The first digit on the dis‐
play and Demo indicator
start to blink.
4. Enter the code 2468 by
pressing the buttons
or to change the val‐
ues and press
confirm.
5. The next digit starts to
blink.
6. Demo mode deactivates
when you confirm the
last digit and the code is
correct.
33
to