Setting The Duration - ARTHUR MARTIN AKM5615PAX Benutzerinformation

Clock function
TIME DELAY
MINUTE MINDER
00:00 COUNT UP TIM‐
ER
Setting and changing the time
After the first connection to the mains, wait
until the display shows
"12" flashes.
1. Press or
2. Press to confirm and switch to set
the minutes.
The display shows
"00" flashes.
3. Press or
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
and again until the indicator for the time of
day flashes in the display.

Setting the DURATION

1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or
the hours for DURATION time.
4. Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
flash in the display. The appliance
deactivates automatically.
Application
Combination of DURATION and END function.
Use to set a countdown time. This function has no effect
on the operation of the appliance. You can set the MI‐
NUTE MINDER at any time, also if the appliance is off.
If you do not set any other clock function the COUNT UP
TIMER automatically monitor how long the appliance op‐
erates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END, core temperature sensor.
and "12:00".
to set the hours.
and the set hour.
to set the current
again
to set the minutes and
and time setting
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to
the off position.
Setting the END
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or
minutes for END time.
4. Press to confirm.
At the set time an acoustic signal sounds
for 2 minutes. and time setting flash in
the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to
the off position.
Setting the TIME DELAY
function
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or
the hours for DURATION time.
4. Press to confirm. The display
shows flashing
5. Press or
minutes for END time.
to set the hours and the
to set the minutes and
.
to set the hours and the
11