Product Markings; Preparing The Product For Use; Contents And Unpacking - Videotec EXDTRX3 Bedienungsanleitung

4.2 Product markings

On the receivers
j
there are 5 labels.
Labels on the packaging:
• Model identification code;
• Product description;
• IP Grade;
• Voltage (Volt);
• Frequency (Hertz);
• Maximum current (Ampere);
• Product serial number (Extended 3/9 bar code).
Labels on the explosion-proof box:
• Box code (CORTEM);
• Voltage (Volt);
• Frequency (Hertz);
• Power (Watt);
• Maximum current (Ampere);
• Box certificate number (CORTEM);
• Box serial number (CORTEM).
Label on the electronic card:
• Model identification code;
• IP Grade;
• Voltage (Volt);
• Frequency (Hertz);
• Maximum current (Ampere);
• Product serial number.
h Before installation, make sure the power
supply and protection specifications of the
device correspond to those in the original
order. Use of unsuitable appliances can
cause serious hazards, risking the safety of
personnel and of the installation.
5 Preparing the product
for use
Any change that is not expressly approved
h
by the manufacturer will invalidate the
guarantee.

5.1 Contents and unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
Check the contents to make sure they correspond
with the list of materials as below:
• EXDTRX3/EXDTRX324 receiver
• 2 3/4" NPT IP66 IECEX-ATEX screws plugs
• Instructions manual
7