Massoth eMOTION 8FL Bedienungsanleitung Seite 29

Attachment 6: CV 55, 57, 116, 120 – Special function A1 + A2 + A4 + A6
Value Application
Inverse coupling with output A1, A3 resp. A5
16
(Alternate blinking)
17 Start-up jitter neon lamp (A1 + A2)
18 Jitter oil lamp (A1 + A2)
Charging control of voltage buffer in programming mode
31
(only A4)
Attachment 7: CV 121, 124 - Special functions A7 + A8
Value Application
0 Servo deactivated
1 Servo operation with 2 end positions (function on/off)
2 Servo operation with turning wheel activation with F-key
+ 4 Control level inverted
+ 8 Switch-off after movement
Note
CV 57 (A2 with A1)
CV 116 (A4 with A3)
CV 120 (A6 with A5)
Only A1 + A2!
Only A1 + A2!
Only in CV 116
(Voltage buffer controlled
by A4)
Note
regular switching output
e.g. for Pantographs or
uncoupler
e.g. rotating firefighter
nozzle
only for servos with
reverse control
Servo in static condition
without trigger
29