Start-Up; Setting Switching Times - Silvercrest IAN 298849 Bedienungs- Und Sicherheitshinweise

Regularly check the device for damage.
Do not replace damaged parts. Contact
the manufacturer or dispose of the device
in an environmentally responsible way.
Do not touch the device with wet hands.
Disconnect the device from the power
mains to de-energise.
Do not connect devices from which
hazards could arise during unsupervised
operation (i.e. heaters).
This device is child-proofed. Both pins of
the plug must be inserted into the socket
at the same time.

Start-up

Setting switching
times (Fig. B)
Use the switching pins
when you wish the timer to switch the
10 GB/IE/NI
to set the times
4