Process Conditions; Safety Guidelines; Maintenance - Siemens pointek CLS100 Schnellstartanleitung

Process Conditions

• relative dielectric constant (εr): 1.5 minimum
• temperature:
• pressure (vessel):
Approvals
• CE
• CSA
• ATEX
• C-TICK (Australia)

Safety Guidelines

Warning notices must be observed to ensure personal safety as well
as that of others, and to protect the product and the connected
equipment. Warning notices are accompanied by a clarification of the
level of caution to be observed.
This product can only function properly and safely if it is correctly
transported, stored, installed, set up, operated, and maintained.

Maintenance

The Pointek CLS100 requires no maintenance or cleaning.
Page EN-4
–30 to +100 °C (–22 to +212 °F) (enclosure version with
stainless steel process connection)
–10 to +100 °C (+14 to +212 °F) (enclosure version with
fully synthetic process connection)
–1 to 10 bar (146 psi) gauge, nominal
• FM
• WHG overfill protection (Germany)
• Lloyd's Register of Shipping, categories ENV1,
ENV2, and ENV5
Pointek CLS100 – QUICK START MANUAL 7ML19985QJ82