Safety 1st PrimeoFix Gebrauchsanweisung Seite 25

system, you must IMPERATIVELY read the instruction
manual of the vehicle, before installing your child car
seat. This manual will indicate the places compatible
with the class size of the car seat, UNIVERSAL ISOFIX
approved.
• WARNING: never combine two ISOFIX anchorage
and car seat belt systems to install your child car
seat.
• ATTENTION: in ISOFIX use the fi tting clips for
lower anchorage to the vehicle is not suffi cient. It
is essential to fi x the "Top Tether" to the upper
anchorage point recommended by the car
manufacturer.
Fitting the PrimeoFix seat with additional tethers
using the vehicle's ISOFIX additional anchorage
points.
The ISOFIX anchors have been developed to obtain
a safe and easy fi xation of the child safety systems
inside the car. Not all cars are equipped with these
anchors although they are standard on more
recent models. Consult the attached list of cars for
which the car seat can be installed correctly (you
can also consult additional updates of this list on
the website www.safety-1st.com.)
• In rear-facing position (GR0+), this product must
not be installed to places equipped with a frontal
air bag. You might be able to deactivate it (see
your car manual). In this case, if you can deactivate
the air bag, you can use the car seat on the front
seat.
• In forward facing position (GR1), the seat must
be placed on the car rear seat or exceptionally on
0529005_Manual_PrimeoFix_S1st_2014.indd 25
the front seat in accordance with the legislation in
force in the country of use (In France: in
accordance with the conditions stipulated in
decree n° 91-1321 du 27-12-1991). If you use the
PrimeoFix on the front seat, it should be possible
to deactivate the airbag of the seat in question or
move the passenger seat back to a maximum
(Please consult your car manual).
• When installing the seat in the rear-facing
position, the belt of the top tether can turn one
quarter turn according to the position of the
anchorage point. This does not impair the proper
operation of the product.
• When installing the car seat, it is necessary to
remove the headrest in order to put the top tether
through correctly.
• Warning: when installing the car seat, spaces
between the base of the car seat and the vehicle
seat are possible depending on the position of the
anchorage points within the vehicle.
• It is essential that the car seat be replaced after
an accident.
• The user must always check that any luggage
and other objects likely to cause injury to the
occupant of the car seat in the case of impact are
properly secured.
• The rigid parts and the plastic sections of a child
restraint device should be positioned and installed
in such a way that they cannot, when the vehicle is
being used under normal conditions, become
trapped under a moving seat or in the vehicle
door.
• Never modify the construction or the materials
of the car seat and the seat belt without
25
EN
17/10/13 17:25