Safety 1st PrimeoFix Gebrauchsanweisung Seite 24

A
Cover
B
Head support
C
Harness
D
Angle of recline handle
E
Rear-facing/forward facing switching handle
F
ISOFIX attachment point clips
G
Base
H
ISOFIX clips activation handle
I
TOP-TETHER rear-facing belt passage
J
Harness adjustment device
K
TOP-TETHER belt
L
Instruction leafl et compartment
M
Support pillow for new born child
N
Carrying
Safety
• All Safety 1st products have been carefully
designed and tested for your baby's safety and
comfort. Use only accessories sold or approved by
Safety 1st. Using other accessories may prove to be
dangerous.
• Please read these instructions carefully and make
yourself familiar with the product before using it.
• Always keep the instructions for future
reference; there is a storage compartment
specifi cally provided on the child seat.
Baby in the Safety 1st PrimeoFix car seat:
• In the rear-facing position, the PrimeoFix car
seat is automatically placed in the maximum
reclining position, therefore, the angle of recline
handle cannot be used.
EN
0529005_Manual_PrimeoFix_S1st_2014.indd 24
• The PrimeoFix car seat cannot be reclined in the
rear-facing position.
• Never leave a child unsupervised.
• Never leave the child alone in the car.
• Even a gentle impact on a vehicle can turn a
child into a projectile.
• For your own safety and that of your child,
always put the child in the child car seat, however
short your journey may be.
• Ensure that the straps under the stomach lie as
low as possible, to properly support the pelvis.
• The temperature inside a vehicle may become
very high, particularly after a long period of
exposure to the sun. It is strongly recommended,
under such conditions, to cover the seat of the car
with a piece of material or something equivalent
to prevent the harness fi xings, and in particular
the metal parts, from becoming hot and burning
the child.
• After putting your child in the seat, ensure that
the harness straps are properly tight. Also ensure
that the strap is not twisted.
• After putting the child in the car seat, ensure
that the harness is suffi ciently taut by pulling the
belt. Ensure also that the belt does not become
twisted
The Safety 1st PrimeoFix car seat in the car:
UNIVERSAL ISOFIX SYSTEM in forward facing
position (Gr1 / 9-18 kg), class size B1.
SEMI-UNIVERSAL ISOFIX SYSTEM in rearward
facing position (Gr0+ / 0-13 kg), class size C,D,E.
Before using the UNIVERSAL ISOFIX anchorage
24
17/10/13 17:25