Installing/Removing Main Memory - Fujitsu D3041 Handbuch

6 - English

Installing/removing main memory

Technical data
Technology
Total size
Module size
A current list of the memory modules recommended for this mainboard is available
on the Internet at: "http://ts.fujitsu.com/mainboards".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
You may use only unbuffered 1.5 V memory modules without ECC.
DDR3 memory modules must comply with the PC3-8500 or PC3-10600 specification.
With a memory configuration of 8 Gbytes, the visible and usable main memory may
be reduced to 7.25 Gbytes (depending on the system configuration).
Channel B
Channel A
Slot to be used
Channel A
Channel B
The installation/removal is described in the "Basic information on mainboard" manual.
20
DDR3 800 / 1066 MHz unbuffered DIMM modules 240 pin; 1.5 V; 64
bit, no ECC
512 MBytes to 8 GBytes
512, 1024, 2048 or 4096 MBytes per module
Installing/removing main memory
Number of memory modules inserted
1
x
Fujitsu Technology Solutions
2
x
x