In The Box; How It Works; Insert And Remove The Battery; Battery Life - Petsafe PBC17-16635 Gebrauchsanleitung

In the Box

How it Works

The PetSafe Bark Collar has 15 levels of static stimulation. It begins with low-level stimulations. If excessive
®
barking continues, the stimulation intensity will increase with each successive bark until the barking stops.
Once the dog has learned to reduce the barking, the initial warning stimulations are reduced. As a built-in
safety feature, if your dog barks 15 times or more within a 1 minute 20 second period, the bark collar will
automatically shut off for 3 minutes.

Insert and Remove the Battery

1. Turn the battery door anti-clockwise a 1/4 turn using the test light tool
or a coin (1A).
2. Insert the 6 volt alkaline battery, negative (–) end first (1B).
3. Replace the battery door turning clockwise a 1/4 turn. Do not
overtighten (1C).
4. This Bark Collar utilises a replaceable PetSafe
alkaline battery. A replacement battery can be found at many
retailers. Contact the Customer Care Centre or visit our website at
www.petsafe.com.

Battery Life

Average battery life is 3 to 6 months, depending on how often your dog
barks. However, due to greater use during your dog's training, your first
battery may not last as long as replacement batteries. Be sure to discard
the spent battery properly.
Two-Color LED
The two-color LED indicator shows good or low battery. Good battery
is indicated by 1 flash every 5 seconds with green LED. Low battery is
indicated by 3 flashes every 5 seconds with the red LED. If there are no
LED lights it is time to change the battery.
4
Bark Collar
RFA-18 6 volt
®
petsafe.com
Long Contact
Points
2 PetSafe RFA-18-11
®
6 Volt Alkaline Batteries
1A
1B
1C
Test Light
Tool