Video Inputs; Attaching A Logo Plate (Ssm-L24F1 Only) - Sony IPELA SSM-L2xF1 series Bedienungsanleitung

Video Inputs

Note
The resolutions that are supported depend on the video
source used.
HDMI
Mode Resolution
EDTV 480i 720 × 480
EDTV 576i 720 × 576
SDTV 480p 720 × 480
SDTV 576p 720 × 576
HDTV 720p 1280 × 720
HDTV 1080i 1920 × 1080
HDTV 1080p 1920 × 1080
HD-15, DVI
Mode Resolution
VGA 720 × 400
640 × 480
SVGA 800 × 600
XGA 1024 × 768
WXGA 1366 × 768
UXGA 1600 × 1200
HD 1920 × 1080
a)
50/60 Hz not available for DVI and HDMI inputs in CVT
format.
PinP
The following video inputs are supported for display on
the main screen and sub-screen in PinP.
MAIN
Video S-Video HD-15
SUB
Video — N
S-Video N —
HD-15 N N
DVI Y Y
HDMI Y Y
Y: supported, N: not supported
Notes
• PinP is not supported in 1600 × 1200 (UXGA) mode.
• When the PinP function is enabled, the Auto
Detection function will be disabled.
Caution
The aspect ratio of the sub-screen will be converted to
16:9, regardless of the aspect ratio of the video input.
Vertical frequency (Hz)
30
25
60
60
50/60
30/25
60/50
Vertical frequency (Hz)
70
a)
60/72/75
50/60/72/75
50/60/75
60
60
60
DVI HDMI
N Y Y
N Y Y
— N N
N — N
N N —
Attaching a Logo Plate
(SSM-L24F1 only)
Remove the protective sheet from the adhesive tape on
the reverse side of the supplied logo plate, and attach the
logo plate to the bottom of the monitor.
Notes
• A black logo plate and a gray logo plate are supplied.
You can select either plate to attach, as desired.
• If there is dust or other particles on the adhesive
surface of the logo plate, be sure to remove it before
attaching the plate.
Video Inputs / Attaching a Logo Plate (SSM-L24F1 only)
11