Technical Data; Additional Information On The "Atex Version - Kessel Aqualift F Comfort 400V Anleitung Für Bedienung Und Wartung

Rated power of the lifting station according to
the Kessel product range overview
Rated current (in operating mode) A
Power usage range, A
Maximum power, kW, cosφ =1
Weight, approx.
Dimensions (LxWxD), mm
Operating voltage
Current
Power, standby
Potential-free alarm contact (accessory)
Battery
Operating temperature, control unit
Protection degree
Connection type
Required fuse
Protection class
5.1

Additional information on the "ATEX version"

Maximum operating altitude
Maximum power consumption
(Electronics without motor)
(Terminals N, L1, L2, L3, PE)
Input circuits
(Terminals TF1a, TF2a, TF1b, TF2b)
Output circuits
Relay disruption and warning
Power contactors
Control circuit
The control unit is to be operated outside the area at risk from explosions. The necessary classification for this:
Group II, category 1G, related equipment for a gas atmosphere.

5 Technical data

MONO kW
1.1 2.2
3.2 5.4
2.5 - 4 4 - 6.3
2.7 4.3
2.5 kg
190 x 280 x 130
400 V AC 50 Hz
with cos phi =1
Approx. 5 W
42 V DC / 0.5 A (two-way contact)
2x 9 V Type MN, Duracell, Order no. 197-081
Direct connection
10-80%, non-condensing
2000 m above sea level
11 VA mono system/ 15 VA dual system
Rotary current
230 V (AC)/50 Hz ± 10% supplied to the electronics
Thermocouple inputs Un = 230 V
U = 42 V AC DC /0.5 A
Main switching contacts U = 400 V +-10% <=4 kW, 50 Hz
Passive (switch and button)
41 / 160
DUO kW
1.1 2.2
2x 3.2 2x 5.4
2x 2.5 - 4 2x 4 - 6.3
2x 2.7 2x 4.3
3 kg
190 x 380 x 130
0°C to +40°C
IP 54
C 16 A 3-pin
I