Navigation in the menu
Action
Select menu item
Activate menu item for processing OK. If a menu sub-item is available, it will be displayed in inverted
Display and edit setting value
Exit menu
3.6 Establishing electrical connections and connections to the level sensors
Make sure that the control unit is disconnected from the power supply during installation work.
Risk of electric shock caused by the unintentional touching of plug-type connections which have been screwed
off (e.g. by children). Make sure that all electrical connections – if present – are fastened as shown
(tightening torque).
3 Assembly
Operation
Up arrow/down arrow, selected menu item is shown in inverted format.
format.
OK. Value is displayed and/or shown in inverted format for setting.
ESC; this exits the current level and switches to one level higher.
Abb. [1]
39 / 160