en
5.3 EXTENDED MENU
All parameters (including parameters of the rapid installation and maintenance menu) can be viewed
during the operation.
To enter the Extended Menu "+", "-" and ENTER must be pressed together until "Extended Menu" is
displayed.
For changing the parameters the password must be entered by pressing "+" or "–".
Use " " together for fast change or ENTER together for very fast change.
Press " " to display parameters in ascending order. To display parameters in descending order,
press " " together with ENTER.
To confirm changes of the parameter setting press ENTER. If password was wrong the error
message "???password=0..." will be displayed.
To exit the extended menu and to save all changes go to "Save & Exit" at the end of the parameter
list. If the Password provided by the technical assistance centre was used, all parameters will be
saved.
Note: If you access to the extended menu to change a parameter without entering the correct
password, after pressing ENTER to save the changed parameter, the display returns to the
password parameter – after inserting the correct password, it ataumatically changes back to
the parameter being edited.
50
Extended
Menu...
Password
00066
Save & Exit
with ENTER
Save & Exit
Done.....