Led Indication - Datalogic Magellan 8100 Kurzanleitung

PRESS
DURATION
Momentary
4 Seconds
a. By standard default, this function is normally disabled to prevent accidental activation by
LED
INDICATION
Scale at Zero
Scanner Active
Good Read
Indication
Program Mode
Indication
Sleep Mode
Indication
Host Disabled
Quick Reference Guide
Table 1. Scale Zero Push Button Functions
FUNCTION
Zero Scale
Scale Diag-
nostics Mode
users.
Table 2. Green and Yellow LED Functions
DURATION
Yellow LED on steady
a
Green LED on steady and dim
a
Green LED - bright flash
a
Green LED - Continuous flash-
ing
Green LED blinks at a
2-second rate
1 second off, 1/10 second on
When programmed to do so, the yellow LED should be
lit when no weight is on the scale, indicating scale at
zero. If it is not, press the switch to zero the scale. The
unit will sound a "click" upon pressing the button.
This mode allows system support personnel to trouble-
shoot problems with the scale. Momentarily press the
a
Scale Zero Push Button or cycle power to exit Scale
Diagnostics Mode.
The scale is at rest and reads zero
weight.
The scanner is ready for operation.
Scanning is immediately available.
Indicates a bar code has been read
and decoded.
Indicates the scanner is in Label Pro-
gramming Mode. Cycle power to exit
Programming Mode.
The scanner motor and/or laser have
automatically switched off and the unit
has entered Sleep Mode due to
extended inactivity.
Host has disabled scanning.
COMMENT
COMMENT
3