Datalogic Magellan 8100 Kurzanleitung Seite 10

LED
INDICATION
Field Replace-
able Unit (FRU)
Warning (Error
Mode)
FRU Indication
a. Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled.
Volume/Tone Push Button
The Volume/Tone Push Button also performs multiple functions depending
upon the duration of time it is pressed:
PRESS
DURATION
Momentary
(when scanner is
asleep)
Momentary
(when scanner is
awake)
4
DURATION
Audible low tone 1 second.
Alternating Green/Yellow LED
flashes continuously.
Green LED flashes a coded
sequence in concert with the
speaker.
Your scanner may not be programmed to display all indications.
Table 3. Volume/Tone Push Button Functions
FUNCTION
Wakes scanner from
Sleep Mode
Increments volume
COMMENT
Serves notice that a fatal FRU failure
has been detected. If a low tone is
heard, but continuous flashing is not
observed, the scanner can still func-
tion in a limited capacity. Call systems
support for service in either case.
Occurs ONLY upon Volume/Tone but-
ton push following a FRU warning.
Enables service technicians to identify
FRU failures.
COMMENT
Alternatively, the scanner can be awakened
by:
- Moving an object through the scan zone.
- A weight change on the scale.
- Scanning with an attached auxiliary scanner.
Press the push button momentarily to
increase speaker volume. When the loudest
volume is reached, a repeated press of the
push button cycles volume back to the lowest
setting, then volume increases on subsequent
press(es). Five volume levels are available.
®
Magellan 8100/8100
Ω Ω
and 8200/8200