Unpacking / Assembly - Kemper autoflow Bedienungsanleitung

2.2 Precautions when using KEMPER autoflow
• Do not use the KEMPER autoflow
pipes, canals etc.
• The particle filter in the respiratory system does not protect against vapours it is limited to protection
against solid and liquid particles only.
• Use only certified filters suitable for KEMPER autoflow
• Use the respiratory system only when switched on. If the power unit is switched off, it does not
protect the user.
2.3 Precautions when using KEMPER freshflow
• Do not use the KEMPER freshflow
because of explosion risk.
• Use the respiratory system only when compressed air is supplied to the unit. If no air is supplied it
does not protect the user.
• Do not use the KEMPER freshflow
being damaged. Pay special attention to heat resist pressured air hose when working in hot areas.
• Make sure that the supply of compressed air is sufficient, especially when other users are connected
to the same compressed air system.
• Always make sure the compressor works properly, otherwise a high concentration of carbon
monoxide could occur.
WARNING!:
If you do not pay attention to the above stated precautions, KEMPER cannot guarantee a safe use of the
autoflow ® or freshflow ®

3. Unpacking / Assembly

3.1 Unpacking
3.1.1 KEMPER autoflow
After having received the KEMPER autoflow
complete and that no part is damaged during transportation or any other cause.
Content of package:
• KEMPER autoflow
• Heavy duty belt
• Air hose
• Battery charger
• Manual for user
Depending on what system you chose, there is also a hood included in the package.
This will be stated on the package itself.
16
®
respiratory system in sealed areas such as tanks,
® respiratory system with oxygen added to the compressed air
® respiratory system if there is a risk of the pressured air hose
respiratory system.
® respiratory system
® respiratory unit 1 pc
1 pc
1 pc
1 pc
1 pc
® respiratory system
® units.
® respiratory system
® package it is necessary to check if the package is