Connecting A User To A Target Device; Using The Oscar Interface - Fujitsu KVM s2-0411 Bedienungsanleitung

3.3

Connecting a user to a target device

Use the Main window of the OSCAR interface to select a target device to which you
want to connect. When you select a target device, the keyboard and mouse are
automatically reconfigured to the correct settings for that target device.
Press Print Screen to start the OSCAR interface, and then use one of the following
procedures:
• In the Main window, double-click the target device name, EID number, or port
number.
-or-
• Type the port number, and press Enter.
-or-
• Type the first few characters of the target device name or EID number, and
press Enter.
You can toggle between two selected target devices. To select the previously
selected target device, press Print Screen and press Backspace.
To disconnect the user from a target device, press Print Screen and press Alt+0. A
Free status flag in the OSCAR interface indicates that the user is not connected to
a target device.
3.4

Using the OSCAR interface

This table describes the keys, key combinations, and mouse actions that you can use in
the OSCAR interface. Two or more key names or mouse actions that are separated by
commas indicate a sequence of actions. Two or more key names or mouse actions that
are separated by a plus sign (+) indicate a combination of actions; that is, they are
performed simultaneously.
You can use the main keyboard or the numeric keypad to type numerals, except when
you use the Alt+0 key combination; you must use the 0 key on the main keyboard when
you use Alt+0.
Key, key combination,
or mouse action
Print Screen; Ctrl, Ctrl;
Shift, Shift; or Alt, Alt
Print Screen, Print Screen
Table 2: OSCAR interface navigation basics
590-595-609D
Connecting a user to a target device
Result
Start the OSCAR interface. To specify which key
sequences can be used to start the OSCAR interface,
click Setup - Menu.
Send the Print Screen keystroke to the currently
selected target device. In other words, a screen capture
will be performed for the target device.
If Print Screen is not selected as startup key sequence
in Setup - Menu, you only need to press Print Screen
once to take a screen capture of the target device.
15