Installation; Required Items; Safety Precautions; General - Fujitsu KVM s2-0411 Bedienungsanleitung

2

Installation

2.1

Required items

Before you install the appliance, make sure that you have all the required items. The
following items come with the KVM s2-0411 appliance:
• Power cord
• One null modem serial cable
• Rack-mounting brackets and mounting hardware
• Documentation CD
• Quick Installation Guide
• Warranty Card
In addition to the items that come with the appliance, you must provide one KVM-IA
(KVM or USB) and one Cat 5 patch cable for each attached target device or appliance.
A Phillips screwdriver is also needed for rack-mounting the appliance.
2.2

Safety precautions

Observe the following guidelines to safely operate the equipment.
2.2.1

General

• Observe and follow service markings.
• Do not service any appliance except as explained in the appliance documentation.
• The appliance contains no serviceable components. Do not attempt to open the
appliance.
• Opening or removing covers that are marked with the triangular symbol with a
lightning bolt might expose you to electrical shock. Components inside these
compartments must be only serviced by a trained service technician.
• If any of the following conditions occur, disconnect the appliance from the electrical
outlet and replace the part or contact the trained service provider:
• The power cable, extension cable, or connector is damaged.
• An object has fallen into the product.
• The appliance has been exposed to water.
• The appliance has been dropped or damaged.
• The appliance does not operate properly when you follow the operating
instructions.
• Keep the appliance away from radiators and heat sources. Also, do not block
cooling vents.
• Do not spill food or liquids on the appliance components, and never operate the
appliance in a wet environment. If the appliance gets wet, see the applicable
section in the troubleshooting guide or contact the trained service provider.
• Use the appliance only with approved equipment.
590-595-609D
5