Trouble-Shooting; Dab Digital Radio; Factory Reset - Revo UNO Gebrauchsanleitung

UNO DAB+ Manual.qxd

Trouble-Shooting

DAB Digital Radio

Q. I hear a 'burbling' noise on some
stations.
A. If the signal strength is too low, a break-
up in reception can occur. This sound is
the result. Make sure that Uno's antenna
is fully extended and in an upright
position. If the problem persists, move
Uno to another location or check that
you are in an area where reception of
this station is possible.
24/9/08 10:30 Page 17
Q. I get a 'No stations available' message?
A. Make sure that your antenna is fully
extended and vertical. Check the signal
strength and move Uno to another
location if necessary.
Q. Uno's clock isn't set.
A. Uno needs to be able to pick-up a DAB
signal or have its clock set manually.
If Uno can find a DAB station, it can then
set its clock.

Factory Reset

In the unlikely event that Uno performs
erratically, it is possible to perform a software
reset to restore the original factory settings.
The factory reset option can be found under
the System Setup heading, which itself can be
found under the Main Menu.
English
17