Trouble-Shooting - Revo Mondo DAB Bedienungsanleitung

English

Trouble-Shooting

Q. I hear a 'burbling' noise on some
stations.
A. If the signal strength is too low, a break-
up in reception can occur. This sound is
the result. Make sure that Mondo's wire
("Pig-Tail") antenna has been unraveled
and is straight. If the problem persists,
try moving Mondo to another location or
check that you have DAB coverage in
your locality.
Q. I get a '?' before some stations in my
station list, and don't seem to be able to
select them.
A. '?' before a station name means that it is
either inactive or unavailable. This can be
because they are not currently
broadcasting, you are outside their
broadcast area or you have simply lost
reception. To remove inactive or
unavailable stations, simply perform a Full
Scan.
16
Q. I get a 'clock not set' message.
A. Mondo needs to be able to receive a
DAB signal in order to automatically set
its clock, since this information is actually
taken from the DAB signal. Try turning
Mondo on and pressing the SCAN
button on your remote control. If Mondo
is able to find a DAB station, it will be
able to set the time and date.