Technical Specifications; Technical Data - Grundig CDP 180 Bedienungsanleitung

Technical specifications

Power Supply
AC power adapter ..........DC 6,0 V, 450 mA +>- external
Battery operation ..........................2 x 1.5 V (LR6, AM3, AA)
GB
Output power DIN 45324, 10% THD
Earphone output...............................................2 x 15 mW
Line output.................................................0.7V +/-1.5 dB
Connections
Line Out ..................................................3.5 mm ø, stereo
DC connector ..........................................3.5 mm ø (6.0 V)
Earphones:...............................................3.5 mm ø, stereo
CD Player
Frequency range:.......................................20 Hz – 20 kHz
S/N ratio, weighted .............................................> 80 dB
Channel separation ...............................................> 52 dB
D/A conversion...........................1 bit/8 times oversampling
Dimensions (w x h x d) ...........136.5 mm x 29 mm x 157 mm
Weight (without batteries) ..............................approx. 0.3 kg
Supplied accessories
...........................................................AC power adapter
..............................................................stereo earphones
..................................................................warranty sheet
.............................................................instructions for use
Subject to technical alterations and alterations in styling E.
and O.E.
22

TECHNICAL DATA

Warning
CLASS 1 LASER PRODUCT means that
the laser's construction makes it inherently
safe so that the legally prescribed
maximum permissible radiation values
can never be exceeded.
CAUTION: Using any equipment or devices other than those
described and specified in these operating instructions, or
tampering with the unit in any way, can result in dangerous
exposure to radiation.
This unit meets the CEE regulations concerning interference
radiation.
This product fulfills European directives 89/336/EEC,
73/23/EEC and 93/68/EEC.
This unit complies with the safety regulations according to
VDE 0860 / BS 415 and thus with the international safety
regulation according to IEC 65.
The type plate is located on the bottom of the set.
CLASS 1
LASER PRODUCT