Troubleshooting - Grundig CDP 180 Bedienungsanleitung

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Under no circumstances should you try to repair the set yourself, as this would invalidate the guarantee.
Problem
No power or no
CD play start
Display: no indication
CD play does not start
or interrupts
Display: no indication
or 00
Play does not start with track 1
No sound or bad sound quality

TROUBLESHOOTING

Possible Cause
Batteries
Batteries incorrectly inserted
Use of new batteries
Batteries are empty
Contact pins are dirty
AC power adapter
Loose connection
CD lid is not securely closed
The HOLD function is activated
Moisture condensation
CD is not or incorrectly inserted
CD is damaged or dirty
RANDOM or PROGRAM is activated
PAUSE is activated
Loose or wrong connections
Volume is not turned up
Earphones worn the wrong way round
Earphone plug is dirty
Strong magnetic fields near the CD player
Electrostatic discharge from the user via
the CD player
Remedy
Insert the batteries correctly
Press PLAY·PAUSE 2;
Change the batteries
Clean them with a cloth
Connect the adapter securely
Close the lid securely
Switch off the HOLD function
Leave the player in a warm place until the
moisture evaporates
Insert a CD, label facing up
Replace or clean the CD
Switch off RANDOM or PROGRAM
Press PLAY·PAUSE 2;
Check connections
Adjust the volume
Pay attention to the L (left) and R (right) indications
Clean the earphone plug
Change the player's position or connections
Press SKIP·SEARCH S or T once or press
PLAY·PAUSE 2; twice
GB
23