Wall-Mounted - Getinge 607 Montage-Und Installationsanleitung

Wall-mounted

Carry out the installation in the following sequence:
1. Drill the hole pattern for the wall bracket, see the
Figure below
V669
2. Fit the wall bracket, using the wall fixture if the wall is
too weak.
3. Remove the transport protection means, and hook the
machine on the wall bracket. To prevent injury, the
machine must be lifted by one person on each side.
4. Connect the water connections.
5. Connect the drain connection.
6. Carry out the electrical installation.
5013246-00
Installation
Wall fixture
179,5 179,5
235,5
235,5
Edition 040210
Wall bracket
V670
5