Installing the wash
disinfector
1 2
100
170
V660
Free-standing
Carry out the installation in the following sequence:
1. Position the machine using a pallet truck.
2. Remove the transport protection means used to anchor
the wash disinfector in the pallet. Fit the legs.
3. Lift the machine off the pallet. To prevent injury, the
machine must be lifted by one person on each side.
4. Connect the drain connection.
5. Connect the water connections.
6. Carry out the electrical installation.
4
3
5
6
4
170
590
Installation
110
631
1. Hot water connection
2. Cold water connection
3. Drain connection, P, wall ø110 mm
4. Drain connection, S, floor ø110 mm
5. Electrical connection
6. External steam supply 1/2"
Edition 040210
V698
5013246-00