8. Initial use
8.1 Switching the fan on and off
Proceed as follows to put the fan into operation:
Place the fan on a flat, stable surface.
Insert the plug into a properly installed socket.
Switch the fan on by selecting one of the three fan levels on the control panel (12):
o
Level 1, weak: Press button 1
o
Level 2, medium: Press button 2
o
Level 3, strong: Press button 3
Switch the fan off by pressing button 0.
8.2 Oscillation
The fan can oscillate horizontally.
Press the oscillation pin (9) in to start oscillation.
Pull the oscillation pin (9) out to stop oscillation.
You can adjust the vertical angle of the fan manually.
9. Maintenance/cleaning
DANGER! Risk of electric shock!
Disconnect the fan from the mains before cleaning
commences.
Do not immerse the fan in water.
Do not allow any water or cleaning agent to enter the
fan.
SilverCrest STV 30 A1
English – 25