Vitek VT-4208 CL Betriebsanweisung Seite 6

ENGLISH
Cooking programs and duration
Program No pressure, °С
Roasting 145
Boil 100
Stew 99
Soup 100
Porridge 95
Baking 145
Rice 100
Russian stove -
Jelly 100
Jam 100
Pilaw 110
Food Steamer 105
Yogurt 40
Heating 120
Multicook 35-150
10. Cooking time in different programs is set by default,
but it can vary. To change cooking time press
the button (25) «TIME», the indicator «
appear on the display and digital hours value will be
flashing.
11. Set the digital hours value with the buttons (27) «-» and
(30) «+», to confirm the selection press the button (25)
«TIME» and then set the digital minutes value.
Note:
•
Setting of cooking time is not available for the «Rice»
and «Pilaw» programs.
12. Using the button (32) «Pressure/Steam Release»
you can switch the high pressure cooking func-
tion on or off (see «Cooking programs» table). The
indicator « » means that, the process chamber is
under pressure.
13. Set the delayed start function, if necessary. To do
this press the button (24) «Delayed start», the indi-
cator « » and the digital hours value will be flashing
on the display. Use the buttons (27) «-» and (30) «+»
to set the digital hours value, to confirm the selection
press the button (24) «Delayed start», and then set
the digital minutes value.
14. If you want to start cooking immediately, skip this step.
Note:
•
The delayed start function is not available for
«Baking», «Roasting» and «Reheat» programs.
VT-4208.indd 6
Under pressure, Time
°С set by
default
(hours)
- 00:25
108 (medium) 00:30
102 (low) 00:30
108 (medium) 00:30
102 (low) 00:40
- 00:30
108 (medium) -
106 (medium) 00:30
108 (medium) 02:00
102 (low) 01:00
112 (high) -
108 (medium) 00:30
- 04:00
- 00:30
00:30
105 (low) 00:15
110 (medium)
115 (high)
15. In order to start the cooking program press the
button (28) «START». The remaining cooking time
» will will be shown on the display (15) and the dots will
blink.
16. If you activated the delayed start function, the
delayed start symbol « » will appear on the display
(15), after switching the unit to cooking mode the
symbol «
Note:
•
In order to stop the cooking program press and hold
the button (31) «STOP/Reheat» for 3 seconds.
17. When the cooking program is over, you will hear
4 sound signals, and the multicooker will be auto-
matically switched to the keep warm mode, the sym-
bols «00h» and operation time in keep warm mode
(hours) will be shown on the display (15).
Note:
•
The keep warm function is not available for «Yogurt»
program.
18. When the keep warm time is over, you will hear a
sound signal and the unit will switch to the ready
mode.
Note:
•
Despite the unit keeps the ready dish warm for 24
hours, it is not recommended to leave the cooked
food in the bowl for a long time, because this may
spoil the food.
6
Duration Temperature
(hours) maintaining
00:05-00:45 +
00:15-3:00 +
00:15-06:00 +
00:30-02:00 +
00:15-2:00 +
00:30-03:00 +
- +
00:30-03:00 +
01:00-06:00 +
01:00-06:00 +
- +
00:20-2:00 +
04:00-10:00 -
00:15-01:00 +
00:10-06:00 +
00:15-02:00
» will go out.
Delayed
start
-
+
+
+
+
-
+
+
+
+
+
+
+
-
+
24.12.2013 9:41:24