Abicor Binzel ABIMIG A 255 Betriebsanleitung Seite 34

5 Putting into operation
EN - 14
To ensure perfect welds, please note the following:
1 Torch handle
2
Cooling liquid
Fig. 5 Pay attention to the residual coolant in the case of
ABIMIG
NOTICE
• Make sure that no residual coolant enters the wire conduit!
• When unscrewing the torch neck (4), always keep the torch handle (1)
pointing downwards. This prevents residual coolant from seeping into the
gas and wire guides.
• Seal the torch neck (4) using the sealing plug (3) to prevent residual
coolant from escaping.
3 Sealing plug
4
Torch neck
®
W T torches
®
ABIMIG
1
2
3
4