Abicor Binzel ABIMIG A 255 Betriebsanleitung Seite 22

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical data
3.2 Signs and symbols used
4 Scope of delivery (for change
neck torch only)
5 Putting into operation
5.1 Setting up the torch
A/A T with screwable 
®
5.2 ABIMIG
and pluggable gas nozzle and tip
adaptor
®
5.3 ABIMIG W/W T liquid-cooled EN-8
5.4 Attaching the wire guide
5.4.1 Liner
5.4.2 PA liner
5.4.3 Torch neck liner
5.5 Attaching the cable assembly on the
machine side
EN - 2
EN-3 5.6
EN-3 5.7
5.8
EN-3 5.9
EN-3 5.9.1 Trigger function
EN-3
EN-4 6
7
EN-4
EN-5
EN-6 8
8.1
EN-6 9
EN-7
EN-7
EN-8
EN-9
EN-9
EN-11
EN-12
EN-15
Connecting the coolant
Setting the shielding gas volume EN-16
Feeding in the wire
Torch handle control elements
Operation
Putting out of operation
Maintenance and cleaning EN-18
Replacing the torch neck
Disposal
®
ABIMIG
EN-15
EN-16
EN-17
EN-17
EN-17
EN-18
EN-19
EN-19