Signs And Symbols Used - Abicor Binzel ABIMIG A 255 Betriebsanleitung

4 Scope of delivery (for change neck torch only)
Standard length L
Coolant connection
Cooling unit power
Control lead
Tab. 4 Cable assembly

3.2 Signs and symbols used

Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1 Step(s) described in the text to be carried out in succession
4 Scope of delivery (for change neck torch only)
EN - 6
The following signs and symbols are used in the operating instructions:
®
The ABIMIG A T LW/W T torch range is divided into three torch series
depending on the level of modular construction:
1 BASIC torches:
• Torches ready for welding in lengths of 3, 4 and 5 m with standard
equipment for wear parts and the wire guide, central connector 
KZ-2 or WZ-2, operating instructions and spare parts list.
2 COMBI torches (in two separate sub-assemblies):
• Basic torches in lengths of 3, 4 and 5 m with standard equipment for
the wire guide, central connector KZ-2 or WZ-2, operating instructions
and spare parts list.
• COMBI torch neck with standard wear parts.
3 VARIO torches:
• Torches ready for welding in freely selectable lengths and modular
construction with operating instructions and a spare parts list.
Order the equipment parts and wear parts separately. 
The order data and ID numbers for the equipment parts and wear parts can be
found in the current catalogue or the spare parts list supplied. The contact
details for advice and orders can be found online at www.binzel-abicor.com.
3.00 m/4.00 m/5.00 m
Plug-in nipple, nom. diam. 5
Min. 800 W
2-wire
®
ABIMIG