Abicor Binzel ABIMIG A 255 Betriebsanleitung Seite 28

5 Putting into operation
®
5.2 ABIMIG A/A T with screwable and pluggable gas nozzle and tip adaptor
1
6
1 Screwable gas nozzle (standard) (XX5)
2 Contact tip
3 Screwable tip adaptor (standard) (XX5)
Fig. 1 Setting up ABIMIG
®
5.3 ABIMIG W/W T liquid-cooled
1
1 Gas nozzle
2 Spatter protector
(if in place)
Fig. 2 Setting up ABIMIG
EN - 8
4 Manifold
5 Pluggable tip adaptor (XX7)
®
A/A T LW
Set up the torch neck according to the following figure:
2 3
3 Contact tip
4 Tip adaptor
®
W/W T
1 Screw the replaceable tip adaptor (4) onto the torch neck (5) and tighten
the tip adaptor (4) using an ABIMIG
2 Screw the contact tip (3) into the tip adaptor (4).
3 Tighten the contact tip (3) with an ABIMIG
If a spatter protector is not yet mounted:
4 Insert the spatter protector (2) into the gas nozzle (1) from the back.
2
5
6
4
5 Torch neck
®
wrench.
®
wrench.
®
ABIMIG
3 4
Pluggable gas nozzle
(XX7)
5