U.S. Robotics 5630 Schnellstartanleitung Seite 6

If you have Windows 2000:
Step 5: Update the driver from the Installation CD-ROM
Click Windows Start, Settings, and Control Panel. Double-click System, click the Hardware
tab, and click the Device Manager button. Click to expand Modems, and double-click
Standard Modem. Click the Driver tab and click the Update Driver button. When the
Upgrade Device Driver window appears, click Next. Select Search for a suitable driver for
my device (recommended) and click Next. Select CD-ROM drives, click Next, and then click
Next again. A Digital Signature Not Found warning may appear*. If it does, click Yes. Click
Finish to complete the installation.
If you have Windows XP:
Step 5: Install the modem drivers
Turn on your computer. After the New Hardware Wizard detects your modem, insert the
Installation CD-ROM into your CD-ROM drive. Wait while the Wizard searches. Select U.S.
Robotics 56K FAX EXT and click Next. A Windows Logo testing message will appear*. Click
Continue Anyway Continue Anyway
Continue Anyway. Click Finish Continue Anyway Continue Anyway
* U.S. Robotics has thoroughly tested in conjunction with the supported hardware and has verified compatibility with
Windows 2000/XP.
All Windows Operating Systems:
Step 6: Install the communications software.
Eject and reinsert the Installation CD into the CD-ROM drive. An interface will appear that
will enable you to install Internet Call Notification, and Phonetools/Winphone software
and view the User Guide for your modem. (If the interface does not appear automatically,
click Windows Start Start Start Start and then click Run
Start
CD-ROM drive uses a different letter, type that letter in place of "D").
T T T T T roubleshooting roubleshooting roubleshooting
roubleshooting roubleshooting
If you have any difficulty with your modem, first make sur If you have any difficulty with your modem, first make sur
If you have any difficulty with your modem, first make sur If you have any difficulty with your modem, first make sur If you have any difficulty with your modem, first make sure that it was
installed corr installed corr installed correctly. ectly. ectly. ectly.
installed corr installed corr ectly.
Windows 95/98/Me: Click Windows S S S S S tart
click the Modems Modems icon. In the Modems Properties screen, you should see a descrip- Modems Modems Modems
tion for your modem. Click the Diagnostics
highlighted. Click the Mor
responses from the modem. This means that the installation was a success. If your
modem is not listed and/or you do not see a series of commands and responses,
check that all connectors and power cables are properly connected to your modem
and the back of your computer. Check that the modem is switched on and the CS or
PWR light is illuminated. Shut down and restart your PC. Check your modem again
using the Control Panel as described above.
Windows NT: Click Windows S S S S S tart
Modems Modems Modems Modems Modems icon. In the Modems Properties screen, you should see a description for
your modem.
Windows 2000/XP: Click Windows S S S S S tart
P P P P P anel anel anel anel. Double-click the Phone and Modem Options anel
Make sure that the correct modem is highlighted. Click the P P P P P roperties
the Diagnostics Diagnostics Diagnostics Diagnostics Diagnostics tab. Click the Query Modem
commands and responses from the modem. This means that the installation was a
6 6 6 6 6
Finish Finish
Finish Finish to complete the installation.
Run Run. In the Run dialog box, type D:\setup.exe Run
Run
tart tart tart, Settings tart
Diagnostics Diagnostics tab. Make sure that the correct modem is Diagnostics
Diagnostics
Mor Mor Mor More Info e Info e Info e Info button. You should see a series of commands and e Info
tart tart, Settings tart Settings, and then Control P Settings Settings
tart Settings
tart, Settings tart tart tart
Phone and Modem Options icon. Click the Modems Phone and Modem Options Phone and Modem Options Phone and Modem Options
Query Modem Query Modem Query Modem button. You should see a series of Query Modem
Settings Settings Settings, and then Control P Settings
Control Panel Control P Control P
Control P
Settings Settings Settings (if applicable), and then Control Settings
D:\setup.exe D:\setup.exe D:\setup.exe. If your
D:\setup.exe
e that it was e that it was
e that it was e that it was
Control P Control P Control Panel Control P anel anel anel. Double- anel
anel anel anel. Double-click the
anel
Control Control Control Control
Modems Modems Modems tab. Modems
roperties roperties roperties button. Click
roperties