Forest-Master FM8 series Bedienungsanleitung Seite 10

After 5 seconds of operation, the pressurised oil will be
overheated and the machine could be damaged. In the case of an
extremely hard log, rotate it by 90
the log) to see whether it can be split in a different direction. In
any case, if you are not able to split the log, this means that its
hardness exceeds the capacity of the machine and thus that log
should be discarded to protect the log splitter.
Always set logs firmly on
the log retaining plates and
work table. Make sure logs
will not twist, rock or slip
while being split. Do not
force the blade by splitting
the log on the upper part.
This will break the blade or
damage the machine.
Break log in the direction of its growing grain. Do not place log
across the log splitter for splitting. It may be dangerous and may
seriously damage the machine. Do not attempt to split 2 pieces of
log at the same time. One of them may fly up and hit you.
IMPORTANT: Never keep pressure on a log for more than
5 seconds to force it to split very hard wood.
IMPORTANT: Do not attempt to split a log across the
grain.
10
(around the central axis of
o
FM8(R/D/T) & FM10(R/D/T)