Typical Installation - Whale Bilge IC series Montagehandbuch Und Bedienungsanleitung

Model Number
BP2082B
BP2084B
SI8284
SI8484
SI8222B
SI8224B
SI8422B
SI8424B
INSTALLATION & USER INSTRUCTIONS
Thank you for purchasing this Whale® product.
For over 40 years, Whale® has led the way in the design and manufacture of freshwater and waste
systems including: pumps, plumbing, faucets and showers for low voltage applications. The
company and its products have built a reputation for quality, reliability and innovation backed up by
excellent customer service. For information on our full range of products visit www.whalepumps.com
1.

TYPICAL INSTALLATION

This Gulper® IC is a high capacity waste pump with intelligent control electronics inside designed to
be installed in recreational marine vessels as a remote mounted bilge pump - Suitable as a primary
bilge pump for boats up to 12 metres / 39.4 ft (designed to ISO15083), or as a secondary bilge pump
on any vessel.
INSTALLATION AND OPERATION MANUAL
Whale® Bilge IC Waste Pump Range
Retail Bilge IC - Remote Mounted Bilge Kit 12 V d.c.
Retail Bilge IC - Remote Mounted Bilge Kit 24 V d.c.
Bulk Strainer IC and Gulper® IC- 12 V d.c with 2m (6ft) cable
Bulk Strainer IC and Gulper® IC- 12 V d.c with 4m (12ft) cable
Bulk Strainer IC and Gulper® IC- 24 V d.c with 2m (6ft) cable
Bulk Strainer IC and Gulper® IC- 24 V d.c with 4m (12ft) cable
Gulper IC
Remote Mounted bilge pump with
integrated intelligent control.
Description
Gulper IC - 12 V d.c.
Gulper IC - 24 V d.c.
Strainer IC
3/4" strainer with
integrated
intelligent control
ENG
Fig 1 - Typical
Installation Gulper® IC
as a Remote Mounted
Bilge Pump
2