Meter Features - Thermo Scientific Orion Star series Bedienungsanleitung

Introduction

Meter Features

To better meet the needs of users in environmental protection and control, food and
beverage, pharmaceutical and consumer product laboratories, the Orion Star and
Star Plus series meters include these key features:
Password Protected Methods – The meter will save up to ten custom
•
measurements and calibrations for future reference . Password protection of
each method eliminates any tampering with methods as multiple users access
only the procedure most appropriate to their work .
AUTO-READ™ – The meter takes a measurement and automatically prints or
•
logs data when the reading becomes stable . The measurement is frozen on the
display until the user prompts the meter to take a new measurement .
• Stirrer Control – Benchtop meters (3-Star and higher) have a stirrer control
for the stirrer probe, Cat . No . 096019, and the AUTO-STIR™ BOD probe, which
eliminates the need for additional stir plates and stir bars .
SMART STABILITY™ and SMART AVERAGING™ – Remove the
•
guesswork by automatically compensating for measurement conditions and
optimizing the meter response time .
• Display Backlight – All 3-Star, 4-Star and 5-Star meters include a display
backlight feature . When the meter is on, a quick press of
backlight on and off . When the meter is operating on battery power, the
backlight will automatically turn off after two minutes to conserve power . When
batteries are low, the backlight will no longer turn on .
Automatic Shutoff – The meters will shut down after 20 minutes without
•
a keypress . This maximizes battery power on portable meters and benchtop
meters that are being run on battery power .
Audible Signals – The meter will beep whenever a key is pressed, providing
•
immediate verification that the user's input was received .
An easy-to-use reference guide, attached to each meter, supports daily meter use .
EN-2 Thermo Scientific Orion Star and Star Plus Series Meter User Guide
™
will turn the