Safety Notices For Maintenance, Inspection And Installation Work; Product Introduction; Intended Use; Foreseeable Misuse - Grundfos DTS 100 Montage- Und Betriebsanleitung

1.5 Safety notices for maintenance, inspection and
installation work
The operating company must ensure that all maintenance,
inspection and installation work is carried out by authorised,
qualified personnel who have been appropriately trained.
All work on the system may only be undertaken with the system
stopped. The procedures described in this manual for bringing
the system to a stop must be followed.
System parts which contain media hazardous to health must be
decontaminated.
All safety and protection equipment must be put back into
operation as soon as work is completed.
Observe the points described in Section
to recommissioning.
Warning
Ensure that the system is suitable for the dosing
medium used.
Observe the safety regulations provided by the
manufacturer of the chemicals used.
Warning
Repairs must be carried out by authorised and
qualified personnel.
Wear protective clothing (gloves and goggles) when
working on the system, connections or lines.
The resistance of the parts that come into contact
with media depends on the medium, media
temperature and operating pressure.
Caution
Ensure that parts in contact with the media are
chemically resistant to the dosing medium under
operating conditions.
5. Commissioning prior

2. Product introduction

DTS dosing tank stations comprise of a tank with optional
equipment and optional preparation for the specified Grundfos
dosing pump, see 2.2.2 Type key.

2.1 Intended use

• DTS dosing tank stations are intended for storing and dosing
certain liquid dosing media.
• The operating safety of DTS dosing tank stations is only
ensured, if used in accordance with the values mentioned in
section 3. Technical data. The specified limit values must not
be exceeded.
• DTS dosing tank stations may only be operated by technical
personnel in accordance with the installation and operating
instructions.
• Modifications or changes to DTS dosing tank stations are only
permitted with the consent of the manufacturer. Original spare
parts and accessories approved by the manufacturer are safe
to use.
Warning
Any usage other than that described here is not
intended. Grundfos accept no liability for any
damage resulting from incorrect use.

2.1.1 Foreseeable misuse

• DTS dosing tank stations are not intended for dosing
explosive, gaseous, highly viscous, solid media, or media with
abrasive or long-fibre components. Observe the
characteristics of the dosing medium under operating
conditions.
• DTS dosing tank stations are not intended for operation in
other conditions than described in section

2.2 Identification

2.2.1 Nameplate

1
DTS 60T 0034RVE1A0G
98382347
2
S/N:00458725
220-240V 50/60Hz 0,09 kW
3
98382347P11072200458725
4
5
Made in Germany
Fig. 1 DTS nameplate
Item Description
1 Type designation
2 Serial number
Voltage [V]
3* Frequency [Hz]
Power rating [kW]
4 Product number
5 Country of manufacture
6 Code for year and week
7* Marks of approval, CE mark, etc.
* DTS with electric stirrers
3. Technical data.
7
6
5