Sony VPL-PWZ10 Kurzreferenz Seite 43

Indicators
You can check the projector status or abnormality by checking the lighting/
flashing status of the ON/STANDBY indicator and WARNING indicator on the front.
If the indicators flash in red, address the problem in accordance with "Warning
indicators and remedies" (page 20).
ON/STANDBY
indicator
Operating status indication
Indicator status
(Lights in red) (Off)
(Flashes in green) (Off)
(Lights in green) (Off)
(Lights in orange) (Off)
WARNING
indicator
Operating status Meaning
Standby The power is supplied to the projector and
the projector is in a standby mode according
to the setting.
Warm-up The projector is warming up after it is turned
on.
Power on The projector is ready for projection.
Other standby The projector is in With No Input (Light
status Cutoff), Quick Reboot standby mode, or the
Speaker Setting is set to "Always On."
19
GB
Indicators