Servicing - Pari SINUS Gebrauchsanweisung

To replace the filter, proceed as follows:
• Unscrew the filter holder from the
compressor using a suitable coin.
• Pull the old filter out of the filter holder and fit the
new filter in its place.
• Reinsert the filter holder together with the new
filter in the compressor and screw it tight with
the coin.

4.4 Servicing

The compressor must only be serviced by the PARI GmbH
Technical Service department or a service center expressly
authorised by PARI. If the compressor is opened or manipulated
by anyone else, all claims under the warranty shall be void. In
these cases, PARI GmbH will also accept no liability.
- 46 -