Abus SHRM10000 Bedienungs-, Installations- Und Wartungsanleitung Seite 43

Installation
When marking out the drill holes, make sure there are no
electrical wires or cables, pipes or other important components
behind the mounting location.
1. Fix the bracket onto the ceiling by
using screws. (recommended)
2. Alternative: remove the double
sided adhesive and stick the bracket
onto the ceiling
3. Mount the device on the mounting
bracket by turning it clockwise to
lock it into place.
Failure to follow the instructions for the selection of a location and
installation may result in risk of injury, e.g. from smoke alarm
devices falling down.
17