Abus SHRM10000 Bedienungs-, Installations- Und Wartungsanleitung Seite 40

Sloped ceilings

There are no special requirements for
ceilings sloped at an angle of < 20°.

In the case of ceilings sloped at an
angle of > 20°, detectors should be
installed 0.5–1 m away from the
highest point.
Partially sloped ceilings

The instructions for fully sloped
ceilings apply for partially sloped
ceilings with a horizontal ceiling
surface measuring < 1 m in width.

In the case of partially sloped ceilings
with a horizontal ceiling surface
measuring > 1 m, detectors should be
installed in the centre of the horizontal
surface.
14