Safety Instructions - FLUX RFM 10 Bedienungsanleitung

Safety Instructions

Comply with all relevant operating and safety instructions.
Read and follow all warnings and safety instructions
before operating this pump.
Only use the pump for its intended purpose.
Avoid stress on the pump parts.
Do not use the pump for the structural support of the piping system.
Make sure that the system components are properly supported to
prevent stress on the pump parts.
We recommend to use flexible suction and discharge connections
(e.g. flexible hose with wire helix).
Ensure that the flexible hoses and other components are
able to withstand fluid pressures developped by this pump.
Ensure that the hose is securely fixed to the hose connector.
Regularly check all hoses and connections for damage
or wear to ensure safe operation.
Verify the chemical compatibility of the pump wetted parts
with the liquids being pumped, flushed or recirculated.
Chemical compatibility may change with temperature
and concentration of the chemicals within the liquids.
Maximum temperature data are based on mechanical
stress only. Some chemicals will significantly reduce
maximum safe operating temperature.
Comply with all relevant safety instructions.
Wear appropriate protective clothing.
.
(Face shield, protective gloves, etc.)
Do not operate the pump dry for longer periods of time.
.
(dry operation may cause unnecessary wear or damage to the pump)
9