Silvercrest 6-in-1 Gebrauchsanleitung Und Sicherheitshinweise Seite 35

Guidelines and manufacturer declaration - electromagnetic
immunity
The multi-function thermometer SFT 76 is intended for use in the electromagnetic environment
described below. The customer or the user of the multi-function thermometer SFT 76
should ensure that it is used in this type of environment.
immunity iec 60601-
tests test level
Conducted RF 3 V 0.15 MHz to
disturbance 80 MHz 6 V within
variables in ISM and amateur
accordance radio bands be-
with IEC tween 0.15 MHz
61000-4-6 and 80 MHz 80%
AM at 1 kHz
Emitted RF 10 V/m 80 MHz to
disturbance 2.7 GHz
variables in
accordance
with IEC
61000-4-3
RF communi- 380 MHz, 27 V/m
cation
equipment in 450 MHz, 28 V/m
accordance
with IEC 710 MHz,
61000-4-3 745 MHz, 780 MHz
9 V/m
810 MHz, 870 MHz,
930 MHz
28 V/m
1720 MHz,
1845 MHz,
1970 MHz
28 V/m
2450 MHz, 28 V/m
5240 MHz,
5500 MHz,
5785 MHz
9 V/m
36 GB/CY
compli- electromagnetic environ-
ance level ment - Guidelines
Not applica- Portable and mobile communi-
ble
cation devices should not be
used in closer proximity to the
multi-function thermometer SFT 76,
including the cables used, than
the recommended safety distance,
which is calculated according to
10 V/m
the equation applicable for the
transmission frequency. Recom-
mended safety distance:
d = [
380 MHz,
27 V/m
[
d =
450 MHz,
28 V/m
where P is the transmitter's rated
710 MHz,
output in watts (W) in accordance
745 MHz,
with the information provided by
780 MHz
9 V/m
the transmitter manufacturer and
810 MHz,
d is the recommended safety dis-
870 MHz,
tance in metres (m).
930 MHz
28 V/m
The field strength of stationary
1720 MHz,
radio transmitters, according to
1845 MHz,
an on-site investigation
1970 MHz
be lower than the compliance
28 V/m
level for all frequencies.
2450 MHz,
Interference is possible in the
28 V/m
same environment as devices
5240 MHz,
5500 MHz,
which bear the following image.
5785 MHz
9 V/m
3,5
]
80 MHz to 800 MHz
E
1
7
]
80o MHz to 2,7 Ghz
E
1
, should
a
b